Continuous Lines with Roller Type Furnaces
Roller type handling system
8 luglio 2014-
Versatile Line for Annealing and Oil Quench, 6000 kg/hour (Italy)
-
Quench Line for tool joints, 3600 kg/hour (Mexico)
-
Quench Line for special parts for petroleum industry, 2800 kg/hour (Mexico)
-
Heating Line, under protective atmosphere, 3000 kg/hour (Italy)
-
Heating Line for steel plates, 14 meters long (Belgium)
-
Pre-Heating Line for steel plates (France)
-
Tempering and Forced Cooling, 5300 kg/h (Italy)
-
Quench Line for tool joints, 3000 kg/h (Mexico)
-
Quench Line for special parts, 6000 kg/hour (USA)
-
Stress-relieving Line and Cooling System, 1800 kg/hour (Italy)
-
Continuous line, 300 kg/hour, third parties heat treatment (Italy)
This type of line can be designed on the basis of the heat treatment type.
Usually these are austenitizing furnaces and tempering/iso-thermal soaking furnaces, quench systems (in oil, water, “cold” water, quenching polymers, air), cooling systems (air, water or mixed) and loading/unloading stations or weighting and control areas.
The parts to be treated (loose, inside baskets or arranged on platforms) are continuously and linearly directed throughout the different phases.
This type of installation is especially recommended for the essentially uniform productions whose parts are relatively homogeneous.
Thanks to this specific solution, from the design point of view and flow management of the material to be treated, this type of line is the key also for the customers who work for third parties.
Usually these are austenitizing furnaces and tempering/iso-thermal soaking furnaces, quench systems (in oil, water, “cold” water, quenching polymers, air), cooling systems (air, water or mixed) and loading/unloading stations or weighting and control areas.
The parts to be treated (loose, inside baskets or arranged on platforms) are continuously and linearly directed throughout the different phases.
This type of installation is especially recommended for the essentially uniform productions whose parts are relatively homogeneous.
Thanks to this specific solution, from the design point of view and flow management of the material to be treated, this type of line is the key also for the customers who work for third parties.
